Blue Polyurethane PU O-Ring Seals, Wear-Resistant Hydraulic, Custom Sizes
MOKEN High-Performance Polyurethane Seals
Blue PU O-Ring Seals
Abrasion Resistant · High Tensile · Extrusion Proof · Hydraulic Grade
MOKEN Blue Polyurethane (PU) O-Rings are manufactured from high-performance thermoplastic polyurethane compounds, engineered for sealing applications where conventional rubber seals fail due to abrasion, extrusion, or high mechanical stress. PU combines the elasticity of rubber with the strength and toughness of engineering plastic — delivering up to 5 times the wear life of NBR in high-friction environments. The distinctive blue color provides quick material identification and a clean, professional appearance.
💡 Why Polyurethane Outperforms Rubber
PU (polyurethane) has a unique molecular structure that gives it exceptional tensile strength (up to 50 MPa), outstanding tear resistance, and excellent abrasion resistance. In hydraulic systems with reciprocating motion, contaminated fluid, or large extrusion gaps, PU seals last significantly longer than NBR or EPDM — reducing downtime and maintenance costs.
PU (polyurethane) has a unique molecular structure that gives it exceptional tensile strength (up to 50 MPa), outstanding tear resistance, and excellent abrasion resistance. In hydraulic systems with reciprocating motion, contaminated fluid, or large extrusion gaps, PU seals last significantly longer than NBR or EPDM — reducing downtime and maintenance costs.
PERFORMANCE ADVANTAGES
|
💎 Exceptional Abrasion Resistance
PU O-rings withstand abrasive particles, contaminated hydraulic fluid, and repeated reciprocating motion far better than rubber. Ideal for dirty environments and high-cycle applications.
|
💪 High Tensile & Tear Strength
Tensile strength up to 50 MPa with excellent elongation and tear resistance. Resists cracking and splitting under high mechanical stress and dynamic sealing conditions.
|
|
🛡 Excellent Extrusion Resistance
PU's hardness and rigidity prevent seal extrusion through large clearances under high pressure. Suitable for hydraulic systems with operating pressures up to 40 MPa (with back-up rings).
|
⚙ Oil & Fuel Resistant
Good resistance to mineral oils, hydraulic fluids, greases, and hydrocarbon fuels. Maintains sealing performance in standard hydraulic and lubrication systems.
|
TECHNICAL SPECIFICATIONS
| Parameter | Value |
| Material | Polyurethane (PU / TPU) — Polyester or Polyether based |
| Hardness | Shore A 70°–95° (90° standard for hydraulic) |
| Temperature Range | -30°C ~ +80°C (special grade to +110°C) |
| Tensile Strength | ≥ 35 MPa (up to 50 MPa for high-grade PU) |
| Elongation at Break | ≥ 300% |
| Tear Strength | ≥ 40 kN/m |
| Pressure Rating | Up to 40 MPa (with back-up rings) |
| Inner Diameter | Custom per drawing (2mm – 300mm+) |
| Cross Section | Custom per drawing (1.5mm – 10mm+) |
| Color | Blue (standard) / Custom colors available |
APPLICATIONS
|
⚙
Hydraulic CylindersPiston & rod seals, high pressure |
💨
Pneumatic SystemsCylinders, valves, actuators |
🏗
ConstructionExcavators, cranes, loaders |
⛏
Mining EquipmentDrills, haul trucks, loaders |
|
🚜
AgricultureTractors, harvesters, loaders |
🚛
Material HandlingForklifts, pallet jacks, lifts |
🏭
Industrial MachineryMachine tools, presses, conveyors |
🚢
Marine & OffshoreWinches, cranes, steering gear |
PU vs. RUBBER — COMPARISON
| Property | Polyurethane (PU) | NBR Rubber |
| Abrasion Resistance | Excellent (5x better) | Good |
| Tensile Strength | 35–50 MPa | 10–20 MPa |
| Extrusion Resistance | Excellent | Moderate |
| Temperature Range | -30°C ~ +80°C | -30°C ~ +120°C |
| Best For | High-wear, high-pressure hydraulic | General oil & fuel sealing |
WHY MOKEN
- Premium PU Compounds — We use high-quality polyester and polyether polyurethane raw materials with consistent mechanical properties batch after batch.
- Precision Molding — Tight dimensional control on ID and cross-section, flash-free finish, and uniform hardness for consistent sealing performance.
- Hardness Options — Shore A 70° to 95° available. We recommend the right hardness based on your pressure, gap, and fluid conditions.
- Custom Sizes — Non-standard diameters and cross-sections produced from your drawing or sample. Custom tooling typically completed in 15–20 working days.
- Technical Support — Our engineers help select the right PU grade, hardness, and back-up ring configuration for your specific hydraulic application.
📩 Get a Free Quotation
Send your size, hardness, pressure, and fluid type — we respond within 24 hours.
Send your size, hardness, pressure, and fluid type — we respond within 24 hours.
